Fig. 1.29. Switches and additional control lamps: 1–switch of external lighting and headlights; 2–proof-reader of light of headlights; 3–switch of the alarm light system; 4–switches of electric window regulators of back doors; 5–handles of regulators of heating of forward seats; 6–switch of a heater of back glass; 7–switch of fog lights

Additional control lamps of the dashboard (fig. 1.29) :

– a control lamp указате pour trailer turn. The lamp starts to blink at inclusion of lamps of indexes of turn of the trailer. If one of lamps of indexes of turn of the trailer is faulty, the control lamp does not blink.

– alarm lamp of ABS.

The lamp lights up in a mode of check of ABS for some seconds at ignition inclusion, then dies away. If the lamp does not die away or lights up at car movement, the ABS or EDS system is faulty. In this case braking is carried out only by means of brake system, i.e. the specified systems do not work. It is necessary to address on service station and car repairs. Action of ABS system is felt on "pulsing" of a pedal of a brake by its pressing.

Switches and switches (see fig. 1.29 ) dashboards:

– switch external wasps of a veshcheniye and light of headlights. The passing or driving beam of headlights joins only at the included ignition. At start-up of the engine or switching off of ignition of a headlight are switched off and only dimensional light burns.

– handle 5 of the proof-reader of light  of headlights. The proof-reader is intended for change of the direction of a beam of light of headlights down depending on the provision of a body at various loading of the car. The handle of management of the proof-reader 2 has four fixed situation:

– in the car only the driver and the forward passenger;

1–driver and four passengers;

2–the driver, four passengers, completely loaded luggage compartment and the trailer with the minimum loading;

3–the driver, completely loaded a luggage compartment and the trailer.

– switch of the 3rd alarm light system. At turning on of the alarm light system lamps of indexes of turn blink the control lamp which has been built in in the switch, and. The alarm light system works both at included, and at the switched-off ignition.

– switches of 4 electric window regulators of back doors. For a raising or lowering of glasses of back doors it is necessary to press and hold the corresponding button. Between switches there is a blocking button, by pressing on which glasses instantly stop.

– handles of 5 regulators about грева forward seats. For inclusion of heating of a seat it is necessary to turn the corresponding handle. Depending on turn of the handle the temperature of heating of seats changes. For switching off of heating of a seat return the switch to a starting position.

– switch 6 of a heater  of back glass. The heater of back glass works only at the included ignition, the control lamp which has been built in in the switch thus lights up. Together with a heater of back glass heaters of rear-view mirrors (on cars with the corresponding option) join.

– switch 7 protivotu-  semolina light of headlights. For inclusion of antifog light of headlights establish the switch 3 in the first situation.

Back antifog lamps join only at the included driving or passing beam of headlights and dimensional light, the corresponding control lamp at the same time lights up.