Removal make in the following order:

– on the models equipped with electrowindow regulators, the central lock, loudspeakers in the doorway etc. it is necessary to remove an upholstery of a door and to disconnect from a door electroconducting;

Fig. 16.39. Limiter of opening of a forward door: 1–forward door; 2–limiter of opening of a forward door

– unscrew a nut from a sharnirny finger, take a pin and disconnect the limiter of opening of a door 2 (fig. 16.39) ;

– holding a door by means of a basic rack or the assistant, unscrew bolts from door hinges;

– remove a door, removing it from hinges.

Installation carry out to sequences, return to removal, taking into account some features.

Clear a bolt and a nut with a stopper a wire brush and process them protective liquid at installation.

In completion of work close a door and check density of a prileganiye of a door to a body.

Check depth on which the shock plate enters into the lock.

If adjustment is required, change number of laying under the main shock plate.