Fig. 16.67. The Heidelberg VI receiver with the coding. The receiver differs from former models existence of inscriptions on the forward panel and three handles – regulators of level of a signal, a strip and the top frequencies

Fig. 16.68. When blocking receiver on the display there is a SAF-e symbol

Some cars (fig. 16.67) is completed with the coded Heidelberg VI receiver , the four-digit fixed code of the receiver is appropriated by manufacturer. At the food termination from the battery irrespective of the reason, for example, at a battery detachment, removal of a safety lock of the receiver or the receiver, the special electronic device locks the receiver which becomes disabled. When blocking receiver on the display there is «SAF-e» designation (fig. 16.68) .

After food restoration for turning on of the receiver it is necessary to enter a protective code. The receiver perceives only the code which has been written down by the manufacturer. It is impossible to change this code. For restoration of operability of the Heidelberg VI receiver:

turn on the receiver (on the display there should be a SAF-e symbol);

press the AM/FM and SCAN buttons and hold them while on the display there will be no 1000 symbol;

NOTE Too long keeping of buttons, or casual repeated pressing are interpreted as incorrectly entered code.

enter a code, pressing buttons of a program choice of the stations, thus gathered code will appear on the display;

NOTE After two and more unsuccessful attempts of a raskodirovka (for example, after introduction of the wrong code) the receiver is blocked, and its working capacity will not manage to be restored even introduction of the correct code. In this case leave the receiver included for a long time, about an hour then there will be a blocking dumping.

press the AM/FM and SCAN buttons. Hold buttons while on the display there will be no SAF-e symbol then release;

enter the correct code in the described sequence.