VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines of configuration of R4
   - 3.2. Petrol engine of configuration of VR6
      3.2.1. Technical characteristics
      3.2.2. General information
      3.2.3. Check of a technical condition of the engine
      3.2.4. Removal and engine installation
      3.2.5. Removal and installation of a head of the block of cylinders
      3.2.6. Repair of a head of the block of cylinders
      3.2.7. Pistons and rods
      3.2.8. Cranked shaft
      3.2.9. Replacement of epiploons of a cranked shaft
      3.2.10. Flywheel
      3.2.11. Drive of the gas-distributing mechanism
      3.2.12. Intermediate shaft
      3.2.13. Removal and installation of the oil pallet
      3.2.14. Oil pump
      3.2.15. Water pump
   + 3.3. Diesel engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits



85288f2d

Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Engines>> Petrol engine of configuration of VR6>> Intermediate shaft
Removal of an intermediate shaft is carried out from the engine which has been removed from the car, in the following order:

Fig. 3.58. Oil pump and oil filter: 1–index of level of engine oil; 2–block of cylinders; 3–cover of a shaft of a drive of the oil pump; 4–gear wheel of a drive of the oil pump; 5–intermediate shaft; 6–cover of an intermediate shaft; 7–asterisk of an intermediate shaft; 8–asterisk of an intermediate shaft of a drive of camshafts; 9–bolt of fastening of asterisks of an intermediate shaft; 10-shaft of a drive of the oil pump; 11-oil pump; 12-bolt of fastening of the oil pump; 13-laying of a maslopriyemny pipe; 14, 16 – bolts of fastening of a maslopriyemny pipe; 15-maslopriyemny pipe; 17-cover of the oil filter; 18-sealing ring; 19-oil filter; 20-case of the oil filter; 21-bolts of fastening of the case of the oil filter


– unscrew bolts of fastening and uncover 3 (fig. 3.58) of a shaft of a drive of the oil pump;
– unscrew bolts of fastening and uncover 6 intermediate shaft;
– remove an intermediate shaft 5.
Installation of an intermediate shaft is carried out in sequence, return to removal. 6 intermediate shaft mount a cover an adjusting label up.