VW Passat repair

+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines of configuration of R4
   + 3.2. Petrol engine of configuration of VR6
   - 3.3. Diesel engines
      3.3.1. Technical characteristics
      3.3.2. General information
      3.3.3. Installation of the piston of the cylinder No. 1 in VMT
      3.3.4. Compression check in cylinders
      3.3.5. Gear belt of a drive of GRM
      3.3.6. Mechanism of a tension of a gear belt
      3.3.7. Gear pulley of a camshaft
      3.3.8. Gear pulley of a cranked shaft
      3.3.9. Pulley of an intermediate shaft
      3.3.10. Belts of a drive of auxiliary units
      3.3.11. Cover of a head of the block of cylinders
      3.3.12. Replacement of an epiploon of a camshaft
      3.3.13. Replacement of an epiploon of an intermediate shaft
      3.3.14. Replacement of epiploons of a cranked shaft
      3.3.15. Replacement of an epiploon of a forward cover of a cranked shaft
      3.3.16. Head of the block of cylinders
      3.3.17. Check of work of hydraulic pushers
      3.3.18. Flywheel
      3.3.19. Replacement of support of the power unit
      3.3.20. Oil case
      3.3.21. Oil pump
      3.3.22. Top casing of the AFN engine
      3.3.23. System of prestarting heating of diesel engines
      3.3.24. Glow plugs
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits

Заказ импортных сигарет

Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Engines>> Diesel engines>> Flywheel
General information:
the design of fastening of a flywheel and elements of coupling is various depending on type of applied transmission;
on cars with a five-speed transmission (020) press disk of coupling is attached by bolts by the end of a cranked shaft, the flywheel is connected by bolts to a press disk of coupling;

Fig. 3.71. Krivoshipno-shatunny mechanism: 1, 2 – a pulley of an auxiliary driving belt; 3–pulley; 4–shatunny loose leaves; 5–rod; 6–plug; 7–rod bolt; 8–lock ring; 9–piston; 10, 11, 12 – piston rings; 13-piston finger; 14-flywheel; 15-gear wreath of a flywheel; 16-cranked shaft; 17-persistent half rings; 18-radical loose leaves

on cars with five-step (020А, 085) and four-stage (084) transmissions an arrangement traditional: the flywheel 14 (fig. 3.71) is established on a cranked shaft, press the disk is established on a flywheel.
Removal and flywheel installation see in section 3.1.8.