VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
- 12. Brake system
   12.1. Technical characteristics
   12.2. General information
   + 12.3. Maintenance
   + 12.4. Replacement of forward brake shoes
   12.5. Replacement of a forward support
   12.6. Replacement of a forward brake disk
   12.7. Replacement of a brake drum and back brake shoes on brakes of drum-type type
   12.8. Wheel cylinder of the back brake mechanism
   12.9. Replacement of brake shoes on back disk brakes
   12.10. Replacement of a support of the back brake mechanism
   12.11. Pressure regulator
   12.12. Main brake cylinder
   12.13. Tubes and hoses of brake system
   12.14. Air removal from a hydraulic actuator of brake system
   + 12.15. Anti-blocking system of brakes (ABS)
   12.16. Brake pedal
   12.17. Lever of the parking brake
   12.18. Cables of the parking brake
   12.19. Adjustment of the parking brake
   12.20. Vacuum amplifier of brakes
   12.21. Stoplight switch
   12.22. Elimination of noise of brakes
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits



85288f2d

Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Brake system>> Lever of the parking brake
Removal make in the following order:

Fig. 12.28. Lay brake: 1 — the lever; 2 — the lever handle; 3 — the top decorative overlay of the lever; 4 — the switch of a control lamp; 5 — draft; 6 — the jack, 7 — carving tips of cables; 8 — cables of the parking brake; 9 — protective plugs


— press the clamps of the handle located in the lower back part of the handle and, having pulled, remove the handle 2 (fig. 12.28) of the lever of the hand brake from the lever 1;
— remove the top decorative slip 3 levers;
— remove a back part of the central console;
— having unscrewed lock-nuts and adjusting nuts, remove them from carving tips of cables 8 parking brakes;
— unscrew two nuts of fastening of the lever to a floor and remove the lever 1 together with the jack 6. If necessary turn the jack on draft of the lever on 90 ° and remove it.
Installation carry out to sequences, return to removal.
Adjust cables of the parking brake then establish a back part of the central console and a decorative overlay for the lever.