VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
- 8. Transmission
   - 8.1. Mechanical transmission
      8.1.1. General information
      8.1.2. Transmission removal
      8.1.3. Transmission installation
      8.1.4. Transmission dismantling
      8.1.5. Dismantling, check of a condition and assembly of primary shaft
      8.1.6. Secondary shaft
      8.1.7. Backing shaft
      8.1.8. Differential
      8.1.9. Gear shifting mechanism
      8.1.10. Installation axial люфта primary shaft
      8.1.11. Installation axial люфта secondary shaft
      8.1.12. Transmission assembly
      8.1.13. Mechanism of management of a transmission
      8.1.14. Adjustment of the mechanism of gear shifting
      8.1.15. Check of level of oil in a transmission
   + 8.2. Automatic transmission
   + 8.3. Distinctive features of transmission of cars with a full drive of Passat Syncro
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits



85288f2d

Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Transmission>> Mechanical transmission>> Installation axial люфта primary shaft

Fig. 8.41. An arrangement special a template and a fixing arm for check axial люфта primary shaft


Fig. 8.42. An arrangement of a template and a fixing arm for check axial люфта a secondary shaft


For adjustment axial люфта primary shaft use special a template and fixing arms (fig. 8.41, 8.42) or address for the help to specialists of specialized service station.
Installation axial люфта primary shaft carry out in the following order:
press a ring of the conic bearing in a coupling/differential case;
establish in a coupling/differential case primary shaft;
establish a case of a transmission and tighten bolts of its fastening the moment of 25 N · m;
having pressed primary shaft to a template a micrometer with a preliminary tightness, check value axial люфта (see fig. 8.41 );
proceeding from value axial люфта pick up the corresponding laying to provide demanded axial люфт primary shaft;
dismantle a case of a transmission and take primary shaft;
take an external ring of the bearing, establish the selected laying then again establish an external ring;
establish primary shaft;
establish a case of a transmission and tighten bolts of its fastening the moment of 25 N · m;
several times turn primary shaft to achieve exact installation of bearings;
repeatedly check axial люфт. The gap of the bearing should be within 0,01 — 0,12 mm.