VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
- 15. Electric equipment
   + 15.1. Technical characteristics
   15.2. Security measures at work with electric equipment
   + 15.3. Detection of not closed chain
   + 15.4. Storage battery
   + 15.5. Generator
   + 15.6. Starter
   15.7. Block of safety locks and relay
   15.8. Replacement of the lock of ignition
   + 15.9. Switches
   + 15.10. Combination of devices
   + 15.11. Internal lighting and lighter
   + 15.12. Headlights
   + 15.13. Windscreen cleaner
   15.14. Windscreen washers
   15.15. Cleaner of back glass
   + 15.16. Central lock
   - 15.17. Hatch
      15.17.1. Removal of the panel of the hatch
      15.17.2. Installation of the panel of the hatch
      15.17.3. Adjustment of a cover of the hatch on height
      15.17.4. Adjustment of the mechanism of a drive of a cable and parallelism of a cover of the hatch
      15.17.5. Adjustment of a closed position of the hatch
      15.17.6. Drainage equipment of the hatch
      15.17.7. Manual opening and hatch closing
+ 16. Body
+ 17. Electric circuits



85288f2d

Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Electric equipment>> Hatch>> Removal of the panel of the hatch
Removal make in the following order:
– turn on the hatch and put it in inclined situation;
– establish the adaptation, opiry it on edge of the decorative panel of a frame of the hatch;
– submit an elevating framework down, to those юр while the first line of a frame of a horizontal framework will not come into an adaptation groove;

Fig. 15.71. Removal of a cover of the hatch assembled with an elevating framework by means of the adaptation 3195: 1–hatch; 2–adaptation


– strike blow to the adaptation with a palm, in the direction specified by an arrow B (fig. 15.71) and beat out a hatch cover assembled with an elevating framework;
– displace a cover back until the adaptation will not rest against the body roof edge then clean the adaptation;

Fig. 15.72. Push a frame of an aperture of the hatch back against the stop into the limiter (it is specified by an arrow)


– push a frame of an aperture of the hatch back against the stop into the limiter (fig. 15.72) ;
– unscrew screws of fastening of a cover of the hatch (screws internal 6-faced shlitsa have) and remove the panel from above.