15.17.1. Removal of the panel of the hatch

15.17.2. Installation of the panel of the hatch

15.17.3. Adjustment of a cover of the hatch on height

15.17.4. Adjustment of the mechanism of a drive of a cable and parallelism of a cover of the hatch

15.17.5. Adjustment of a closed position of the hatch

15.17.6. Drainage equipment of the hatch

15.17.7. Manual opening and hatch closing 

Fig. 15.70. Hatch and its elements: 1–cover sealant; 2–elevating framework of a cover; 3–screw; 4–a framework for horizontal shift of a cover of the hatch; 5–frame of an aperture of the hatch assembled; 6–drainage hose; 7–hidden screws of fastening; 8–mechanism of a drive of a cable; 9, 16 – a spring ring; 10-lift/limiter spring; 11-lift/limiter; 12-adjusting washer; 13-the screw with internal 6-faced shlitsa; 14-clamp lever; 15-spring

For access to the mechanism of a drive of the hatch for the purpose of repair or adjustment it is necessary to remove the external panel and to shift aside an elevating framework 2 (fig. 15.70) of a cover and a framework 4 for horizontal shift. The structure of a frame of the 5th aperture of the hatch as uniform knot includes the rails, directing a cable and cables. To replace a frame of the hatch it is necessary to remove a slip from salon and tselnolity the frame case.

PREVENTION It is forbidden to grease rails in a frame of the hatch with usual universal greasing. For this knot there is a special greasing with number according to the Volkswagen G 000 450 02 catalog.