Early models

Removal make in the following order:

Fig. 15.45. Removal of a frame of a fog light: 1–bumper; 2–frame of a fog light; 3–percussion cap; 4–razzhimny rivet

– having picked up a narrow screw-driver a razzhimny rivet from a percussion cap, remove a frame of a fog light (fig. 15.45) ;

– take percussion caps and remove a frame from bumper facing;

– turn out screws of fastening and take a headlight;

– uncover and will corrode a back part of a headlight;

– disconnect connection of a minus wire from a headlight;

– remove a fog light.

Fig. 15.46. Arrangement of fixing elements of a fog light: 1–fastening screw; 2–screw of adjustment of a stream of light down

Installation carry out to sequences, return to removal. If necessary, rotating the adjusting screw, adjust headlight light in the vertical plane (fig. 15.46) .

Light adjustment in the horizontal plane is not provided.