VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
- 15. Electric equipment
   + 15.1. Technical characteristics
   15.2. Security measures at work with electric equipment
   + 15.3. Detection of not closed chain
   + 15.4. Storage battery
   + 15.5. Generator
   + 15.6. Starter
   15.7. Block of safety locks and relay
   15.8. Replacement of the lock of ignition
   + 15.9. Switches
   + 15.10. Combination of devices
   + 15.11. Internal lighting and lighter
   - 15.12. Headlights
      15.12.1. Early models
      15.12.2. Later models
      15.12.3. Reflector of headlights
      15.12.4. Engine of adjustment of an inclination of light of headlights
      15.12.5. Replacement of a lamp of a headlight
      15.12.6. Early models
      15.12.7. Later models
      15.12.8. Adjustment of light of headlights
      15.12.9. Conditions of carrying out adjustment of light of headlights
      15.12.10. Forward indexes of turn and dimensional light
      15.12.11. Fog lights
      15.12.12. Later models
      15.12.13. Back lamps
   + 15.13. Windscreen cleaner
   15.14. Windscreen washers
   15.15. Cleaner of back glass
   + 15.16. Central lock
   + 15.17. Hatch
+ 16. Body
+ 17. Electric circuits



85288f2d

Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Electric equipment>> Headlights>> Reflector of headlights
Removal make in the following order:
– remove a headlight;

Fig. 15.34. Removal of brackets of fastening of a rasseivatel


– a narrow screw-driver carefully raise brackets of fastening of a rasseivatel and remove a rasseivatel (fig. 15.34) ;
– turn cogwheels of adjustment of light of headlights so that it was possible to take a reflector from the case;
– remove lamps and disconnect the socket of connection of "weight" of a reflector.
Installation is made in sequence, return to removal.
If necessary replace consolidation.