VW Passat repair

+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
- 13. Wheels and tires
   13.1. Technical characteristics
   13.2. Replacement of wheels
   13.3. Wheel bolts
   13.4. Running in of tires
   13.5. Storage of tires
   13.6. Balancing of wheels
   13.7. Antisliding chains
   13.8. Spare wheel
   13.9. Pressure check in tires
   13.10. Check of a profile of tires
   13.11. Gate check
   13.12. Check of radial and lateral palpation of tires
   13.13. Check of radial and lateral palpation of disks
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits


Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Wheels and tires>> Check of a profile of tires
Intensive wear of tires is promoted by a sports manner of driving, intensive accelerations and sharp braking.

Tires can be maintained to achievement of depth of a profile of 1,6 mm (flutes of a profile should have depth on all surface of the tire not less than 1,6 mm). However with a view of safety it is recommended to make change of tires at depth of a profile of 3 mm.

Tires M+S on snow have sufficient coupling with the road at depth of a profile not less than 4 mm.
It is necessary to survey the tire on existence of cuts and to establish their depth. If cuts reach a cord, the steel cord will be корродировать from getting moisture.