VW Passat repair

+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
- 13. Wheels and tires
   13.1. Technical characteristics
   13.2. Replacement of wheels
   13.3. Wheel bolts
   13.4. Running in of tires
   13.5. Storage of tires
   13.6. Balancing of wheels
   13.7. Antisliding chains
   13.8. Spare wheel
   13.9. Pressure check in tires
   13.10. Check of a profile of tires
   13.11. Gate check
   13.12. Check of radial and lateral palpation of tires
   13.13. Check of radial and lateral palpation of disks
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits


Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Wheels and tires>> Spare wheel
It is possible to establish a spare wheel both on a lobby, and on a back axis.
The spare wheel is intended only for short-term use and it is necessary to replace it with the usual as soon as possible.
After installation of a spare wheel pressure in its tire should make 4,2 kgfs/cm2.
With the established spare wheel it is impossible to exceed speed of 80 miles/h.
It is necessary to avoid the maximum acceleration of the car, intensive braking and sharp turns.
At installation of a spare wheel the road gleam under the corresponding axis decreases approximately by 30 mm.
It is forbidden to apply spare wheels of other types, rather than regulated specifically to this model of the car.
It is not allowed to establish two or more spare wheels.