VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
- 9. Drive of forward wheels
   9.1. General information
   9.2. Check of antisplash covers
   9.3. Removal and installation of a drive of forward wheels
   9.4. Removal and installation of the internal hinge
   9.5. Removal and installation of the external hinge
   9.6. Dismantling of the external hinge
   9.7. Dismantling of the internal hinge
   9.8. Quencher of krutilny fluctuations of a power shaft
   9.9. Epiploon of a flange of a semi-axis
   9.10. Malfunctions of power shafts
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits



85288f2d

Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Drive of forward wheels>> Epiploon of a flange of a semi-axis
Removal of an epiploon of a flange of a semi-axis carry out in the following order:
– will hang out a forward part of the car and fix it basic racks;
– unscrew bolts of fastening and disconnect a power shaft from a flange of a drive of a transmission. At replacement of the right sealing ring of differential unscrew a counterbalance from the bottom frame of a steering, and an internal part of a power shaft attach a wire to a body. At replacement of the left sealing ring of differential remove a power shaft from the car;
– on cars with a mechanical transmission remove a drive flange from a transmission. For removal of a flange of a semi-axis having arranged under a flange on a transmission case steel plates, roll in a flange long bolts until bolts, having rested against plates, will not take a flange from a transmission;
– on cars with an automatic transmission uncover in the central part of a flange, take a spring lock ring and a tarelchaty washer, previously having noted its situation. Take a semi-axis flange from an automatic transmission;
– using the corresponding tool or a screw-driver, take an epiploon from a transmission case. Note the provision of an epiploon.

       PREVENTION
The epiploon and lock spring ring are subject to obligatory replacement.

Installation of an epiploon of a flange of a semi-axis carry out in the following order:
– carefully clear a nest for installation of a sealing ring;
– oil working edges of an epiploon. establish an epiploon in a nest, it is correct it сориентировав. For installation of an epiploon use a tubular opravka of the corresponding diameter;
– on cars with an automatic transmission establish a spring in a persistent washer and establish them together with a konusny ring. Check, that the konusny ring settled down the party with a zaplechik to a persistent washer;

Fig. 9.23. Installation of a flange of a drive on an automatic transmission with use of the VW 3109 tool


– oil working edges of an epiploon and establish a semi-axis flange. Establish a semi-axis flange into place striking to it blows with a hammer through wooden whetstone. For installation of a flange of a semi-axis on cars with an automatic transmission use of the special VW3109 tool (fig. 9.23) is necessary ;
– on cars with an automatic transmission establish a tarelchaty washer, a lock ring and a protective cover;
– establish the internal hinge on a flange of a semi-axis of a transmission and tighten bolts the regulated moment;
– check oil level in a case of a transmission and if necessary add.