VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
- 7. Coupling
   7.1. Specifications and characteristics
   7.2. General information
   7.3. Check of a technical condition of hydraulic system
   7.4. Coupling pedal
   7.5. Air removal from a hydraulic drive of coupling
   7.6. Removal and installation of the working cylinder of coupling
   7.7. Removal and installation of the main cylinder of coupling
   7.8. Removal and installation of a cable of a drive of coupling
   7.9. Removal and installation of press and conducted disks of coupling
   7.10. Removal and installation of the lever and bearing of switching off of coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits



85288f2d

Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Coupling>> General information

Fig. 7.1. Coupling: 1–working cylinder of a hydraulic drive of coupling; 2–fixing bolt; 3–control lever mechanical (hummock) coupling; 4–pusher; 5–sealing washer (mechanical (hummock) type of coupling); 6–gear washer (mechanical (hummock) type of coupling); 7–the directing plug of the bearing; 8–lever of switching off of coupling; 9–Vyzhimny bearing; 10-bolt; 11-press disk; 12-a conducted disk; 13-a bolt of fastening of the directing plug of the bearing; 14-the directing plug; 15-spring clamp; 16-sealing ring of an entrance shaft; 17-sealing washer; 18-a hairpin with a spherical tip; 19-transmission case


Coupling (fig. 7.1) is intended for short-term separation of the engine and transmission at gear shifting or braking and their smooth connection at a car troganiye from a place, and also protection of details of transmission from dynamic loadings.
The coupling applied on cars, one-disk, dry, constantly closed type, with the central press spring of diafragmenny type and a quencher of krutilny fluctuations on a conducted disk.
The principle of action of coupling is based on torque transfer from a flywheel on a conducted disk of coupling, so, and on primary shaft of a transmission, at the expense of the forces of the friction arising between disks at included coupling. Press the disk clamps among themselves and a flywheel a conducted disk with the effort which is not allowing its pro-slippings. For switching off of coupling vyzhimny the bearing influences a spring of a press disk of coupling and wrings out press a disk from a flywheel therefore the conducted disk is released and torque transfer between the engine and a transmission stops.
Press the disk of coupling fastens bolts to a flywheel. The conducted disk of coupling is located between a press disk and a surface of a friction of a flywheel. The nave of a conducted disk of coupling is established on primary to a shaft of a transmission and freely moves on shaft grooves.
Because at each inclusion and switching off of coupling there is an insignificant wear of overlays of a conducted disk of coupling, periodic adjustment of a free wheeling is necessary for preservation of normal working capacity on coupling with a hummock drive. Coupling with a hydraulic drive of adjustment does not demand, as by each pressing a coupling pedal wear is automatically compensated by necessary amount of the liquid arriving from a tank of a hydraulic drive of brake system, the general with a hydraulic drive of coupling.